|
|
CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Xeon® 3000 Series (Conroe) dual-core processor
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor up to 3.2GHz
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor up to 3.8GHz
- Supports an Intel® Celeron® D processor with 256KB L2 Cache up to 3.06GHz
- Hyper-Threading (HT) capable
- 2MB / 1MB L2 Cache
|
System Bus |
- 1066 / 800 / 533 MHz system bus
|
|
|
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
|
Memory Type |
- DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
Memory Voltage |
|
|
|
Chipset |
- Intel 3000 (Mukilteo-2) chipset
- ICH7R + PXH-V + Intel® 82573V + Intel® 82573L
|
Serial ATA |
- Intel® ICH7R SATA controller built-in
- RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (
Optional: AOC-IPMI20-E)
|
Network Controllers |
- 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-T, RJ45 output
|
VGA |
- On-board ATI ES1000 16MB graphics
|
Super I/O |
|
Clock Generator |
|
|
|
Universal Slot |
- 1x 64-bit PCI-X 133MHz Slot (via Riser Card) OR
- 1 (x8) PCI-Express Slot (via Riser Card) - Optional
|
|
|
Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
IDE |
- One EIDE channel supports up to two UDMA IDE devices
- IDE Master / Slave 2 ports
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- White Connector for Compact Flash (CF, 40-pin IDE connector) card only
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- Up to 6x USB 2.0 compliant / 1.1 compatible ports
- 4x Internal USB headers
- 2x Rear USB ports
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Header
|
Parallel Port |
- 1x ECP / EEP Parallel Header
| |
|
|
|
Form Factor |
|
Model |
-
SC513F-260
(For SuperServers Only) |
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports |
|
|
|
Internal Bay |
- 1x 3.5" internal drive bay
|
|
|
Fans |
- 2x 16cm 3-pin Nidec Counter-rotating Fans
|
|
|
Thermal control 260W AC power supply with PFC [ 24-pin, 4-pin=12V, (2) 4-pin ] |
AC Voltage |
- 100 - 240V, 60-50Hz, 4 Amp Max
|
DC Output |
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
CPU |
- Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
|
FAN |
- Fan Speed Control
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
- Suspend-state indicator LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- SMBIOS 2.3
| |